The 10 Best Sports Cars of the 60s
You may not think that the 1960s was one of the best decades for the production of sports cars, but in reality, it was a pretty darn good time to be a car enthusiast. During the 1960s, everyone loved cars, and vehicle manufacturers weren’t concerned with market research when designing a new model. Instead, they focused on their passion and their ideas when creating sports cars.
Interestingly, sports cars manufactured in the 60s were free from the government regulations that arose during the 1970s. During the 1960s, there were almost no emission controls and basically no safety standards. This meant that sports cars were truly designed with a focus on performance qualities and ingenious design appearances.
Due to this, sports cars from that era are some of the most impressive vehicles ever to exist. They were also much improved from their 1940s and 1950s counterparts. No longer were sports cars boxy and lacking innovative qualities as 60s sports car manufacturers incorporated aerodynamic designs by implementing swooping curves.
On this list, we have featured 10 of the best 1960s sports cars that have managed to remain relevant despite the technological advancements present in the automobile industry today. Would you like to be impressed by a few of the most memorable 60s models that will likely have you eager to test drive one of them at least once during your lifetime? If so, you should have a look at the cars we have discussed.
1. 1966 Lamborghini Miura
The 1966 Lamborghini Miura is still to this day considered one of the most beautifully designed sports cars. This Italian model is often referred to as the original pin-up car, and the lean nose and large grille got it noticed amongst its competition. Previously the Miura models had full panel components, but the 1966 models possessed a wholly new and ingenious Italian manufacturing style.
Instead of full panel components, the 1966 models had two twin surfaces divided by a middle crease point. Essentially this sports car’s shape was split into pieces giving it a much sleeker appearance. Additionally, the 1966 Lamborghini Miura had a transverse-mounted quad-cam V12 engine capable of producing 262 pounds per foot of torque and 350 horsepower.
Although these engine specs were impressive, the vehicle did have trouble with handling calibration, braking strength, and aerodynamics. However, that didn’t stop it from being able to reach a top speed of 170 mph. Additionally, the 1966 Miura could reach 0 to 62 mph in approximately 6.5 seconds.
2. 1969 Maserati Ghibli Spyder
One of the rarest sports cars manufactured in the 60s was the 1969 Maserati Ghibli Spyder. Only 20 models of the Spyder were ever produced, making it incredibly sought after by car collectors. Interestingly the Maserati Ghibli Spyder was inspired by the Daytona Ferrari.
Although this sports car is an Italian design, it has an American muscle appearance which was unusual for the time. The 1969 Maserati Ghibli Spyder had flip-up headlights, a wide mouth radiator grill with a crown, and two rectangular air vents.
Unlike muscle cars, this model had a narrow hood with a small scoop near the end. One of the rare features of this vehicle is a small window upfront which wasn’t commonly seen with 1960s convertible cars.
Inside the 1969 Maserati Ghibli Spyder is a 4.9-liter V8 engine that was able to produce 330 horsepower. There is much mystery surrounding this sports car’s engine specifications and capabilities, however, it is known that the engine featured four vertical twin-choke Weber carburetors, a five-speed transmission, and was able to reach 154 mph. This grand tourer was actually the fastest available during 1969.
3. 1964 Porsche 911
Our list wouldn’t mean much if we didn’t include the iconic 1964 Porsche 911. Although this sports car was slower than its competition, it made up for it with its beautiful and elegant design. Interestingly, many might not know that this was not the original name of this vehicle. Before a legal dispute arose with Peugeot, the Porsche 911 was known as the Porsche 901.
During the 1960s, sports cars were much smaller than their modern counterparts. The 1964 Porsche 911 was incredibly small and light, yet it was one of the most aerodynamic models to be produced in the 60s. The rear-engine layout allowed this model to have a lower hood and attractive teardrop design. The car also came equipped with high-tech fog lights and Fuchs alloys.
Additionally, the interior was designed to be very neat yet spartan. It’s believed Porsche deliberately did this because they thought drivers wanted to have a stronger focus on driving the vehicle than on what it looked like. Although it featured a simple interior, quality materials and furnishings were used.
We mentioned earlier that the 1964 model was slower, but this does not mean it wasn’t powerful. It was equipped with a 2-liter V6 engine that could produce 158 horsepower, and it managed a maximum speed of roughly 125 miles per hour. Impressively it could reach 0 to 60 miles in around 8.5 seconds which is brilliant when considering its small stature.
4. 1964 Aston Martin DB5
Arguably one of the most well-known cars in the world is the 1964 Aston Martin DB5. This is thanks to the special effects expert John Stears who used the model for the James Bond film Goldfinger. The 1964 Aston Martin DB5 is a luxury British grand tourer designed by the Italian coachbuilder Carrozzeria Touring Superleggera.
From 1963 until 1965, there were 1,059 Aston Martin DB5s in existence. It’s believed that as of 2020, there are only 25 units still in existence. This model is a two-door coupe convertible with a front engine and a rear-wheel drive.
Some of the standard equipment present on this vehicle included wool pile carpets, a magnesium alloy body, electric windows, reclining seats, twin fuel tanks, full leather trim, and even a fire extinguisher. The standard equipment is impressive, but the engine specs were the main attraction for this vehicle during the 1960s.
The 1964 Aston Martin DB5 had a 4-liter straight-six engine and a five-speed manual transmission. It was capable of producing 5500 RPMs, 288 pounds per foot of torque, and 282 horsepower. Additionally, this iconic vehicle could reach 0 to 60 mph in eight seconds and it had a top speed of 145 mph.
5. 1967 Ferrari 330 P4
The 1967 Ferrari 330 P4 is featured as one of the rarest cars in the world, with only one original model still in existence. It’s unlikely you’ll ever catch a glimpse of this ultra-rare sports race car, but you can learn more about what makes it one of the most memorable sports cars of the 1960s.
The 1967 Ferrari 330 P4 won the 1967 1000km Monza in one of the most unforgettable races in race history. This race was so memorable because two P4s entered the race, and they finished side by side.
Over the years, many sports car manufacturers have tried to emulate and design vehicles with the Ferrari 330 P4 in mind. Still, none have managed to produce a car quite as beautiful as the original.
This 1960s Ferrari possesses one of the most impressive engines on our list, made all the more impressive by its incredibly lightweight body coming in at 1,746 pounds. It’s equipped with a mid-engine layout and has a 4-liter naturally aspirated V12 engine with a five-speed manual transmission. Additionally, its rear-wheel-drive and can produce up to 385 pounds per foot of torque and 450 horsepower. Moreover, it has a tasty top speed of 210 mph.
See more about - 10 Best Sports Cars Of The 70s
6. 1964 Ford GT40 MK
In the 1960s, Ford and Ferrari were rivals that were constantly trying to outdo one another. This rivalry was born out of a business deal that went wrong, which led to Ford swearing revenge. This revenge came in the form of the spectacular sports car, the 1964 Ford GTO MK1.
The 1964 Ford GTO MK1 took the world by storm and managed to beat Ferrari at its own game during the Le Man’s race event. In fact, the GTO MK1 was designed so well that it beat Ferrari models four years in a row between 1966 and 1969 at the 24 hours du Sarthe. To add fuel to the flames, Ford took all three spots on the podium at the first race event in 1966.
The MK1 has the traditional FordGT styling. It features a wedge-shaped front end, square headlights with aerodynamic plastic covers, a drop-off tail section, and a low slung 40.5” high roof. This model possessed a V8 engine that allowed it to reach 200 mph and produce 380 horsepower.
7. 1961 Jaguar E-type
One of the fastest sports cars to come out of the 1960s was the innovative 1961 Jaguar E-type. Surprisingly, despite what many believe, the body of the 1961 jaguar E-type is not a result of extensive wind tunnel tests. Instead, the body was manufactured based on a mathematical basis by Jaguars chief aerodynamicist Malcolm Sayer.
The combination of the 1961 Jaguar E-type’s appearance, competitive pricing, and high-performance qualities made this sports car a true 1960s icon. Some notable features that distinguished this model from its competitors included its unitary construction, disc brakes, independent front and rear suspension, and rack and pinion steering.
Impressively these distinguishable features spurred industry-wide changes. This model is a two-door coupe that has a 3.8-liter inline-six engine. It can reach up to 150 mph, producing 265 horsepower, and reach 0 to 60 miles in 6.9 seconds.
There are a few more interesting facts about this car that few might not be aware of. For example, in 1960 Enzo Ferrari called the 1961 Jaguar E-type the most beautiful sports car ever made.
Additionally, “Sports Car International” placed this model at the top of their list for the top sports cars of the 1960s. Moreover, the 1961 Jaguar E-type has also appeared in the Austin Powers films and the television series Mad Men, making it a cultural icon.
8. 1962 Ferrari 250 GTO
In 1962 the Ferrari 250 GTO only cost $18,000 to purchase brand new, but in 2018 a prized mint condition second-hand model sold for a whopping $70 million. This price set a new record at the time and has helped it become one of the most sought-after 1960s sports cars.
In 2004 Sports Car International featured the 1962 Ferrari 250GTO eighth on its list of “Top Sports Cars of the 1960s.” Sports Car International also nominated it as the top sports car of all time. In contrast, Motor trend Classic appointed it as the “Greatest Ferrari of All Time,” and Popular Mechanics named this model the “Hottest Car of All Time.”
This model was built to compete against other similar models in Group 3 GT Racing. The 1962 Ferrari 250 GTO was built around an oval tube frame that incorporated A-arm front suspension Watts linkage, rear live axle, and disc brakes.
The engine inside this sports car was a race-proven Tipo 168/62. It possessed a 3-liter V12 engine with an alloy design that utilized a dry sump and six Weber carburetors. With this five-speed manual transmission engine, it was able to produce up to 296 horsepower and 7,500 rpm.
9. 1967 Alfa Romeo 33 Stradale
One of the most unique sports cars from the 60s is the 1967 Alfa Romeo 33 Stradale. Each one of the 18 models produced was designed to be curvaceous with no hard angles. The appearance, performance, and speed capabilities of the 1967 Alfa Romeo 33 Stradale have helped cement this sports car in history as one of the most legendary ever to be manufactured.
A unique feature of this model is the butterfly doors that opened upwards with the hinges located on the A-Pillar, which lends the vehicle a chic appearance. Interestingly, from the beltline upwards, the vehicle’s doors were made entirely of glass. Additionally, the original model was painted a luscious red, which was draped over exquisite gold rims.
Besides its uber-luxurious appearance, the 1967 Alfa Romeo 33 Stradale possessed some incredible engine specifications. This sports car had a 2-liter V8 engine capable of producing 152 pounds per foot of torque and 227 horsepower.
10. 1967 Toyota 2000GT
In 2020 a 1967 Toyota 2000GT sports car was sold for an astounding $912,500. Only 351 Toyota 2000GT’s were ever manufactured, accounting for the high price tag of the one sold in 2020. Curiously this model was initially designed by Yamaha for Nissan, but it was later picked up for production by Toyota when the companies decided against producing it.
Arguably the 1967 Toyota 2000GT revolutionized the automotive world’s view of the Japanese sports car market. Before this model went into production, Japanese sports cars were seen as practical imitative vehicles. The 1967 Toyota 2000GT demonstrated that Toyota was capable of producing sleek, high-performance sports cars that could rival European competitors.
Interestingly this Toyota sports car was modeled after the legendary Jaguar E-type. It was equipped with pop-up headlights, a small bumper, rosewood or walnut veneer dashboard inlays, and many other luxury touches.
The 1967 Toyota 2000GT featured a longitudinal mounted straight-six 2-liter engine. One could purchase this sports car with either a three-speed automatic transmission or a five-speed manual transmission. With the manual transmission, the vehicle was able to produce 150 horsepower and reach a top speed of 137 mph.
See more about - The 10 Best Sports Cars Of The 80s
As an Amazon Associate we earn from qualifying purchases.
The 10 Best Grilling Tools for Your Summer BBQ
If you want to be a grill master, you need the right tools for the job. While having a top-quality grill is obviously vital, there are many other things you need to make your life at the grill as easy as possible.
There are plenty of tools out there that will enhance the flavor of your food and allow you to cook your meat and veggies to perfection. We’ve looked at a range of them from meat thermometers and grilling gloves to cedar planks and grill baskets.
While all these tools are different, they’re all great ways to enhance your grilling experience. We’ve searched high and low to come up with 10 that you’ll love. All you need to do is read on and choose the best grilling tools for you. Let’s get started!
1. Kizen Digital Meat Thermometers for Cooking
When cooking on the grill, it can be easy to be a little nervous about whether or not your meat is ready. With this Kizen meat thermometer, you can put those fears to bed and know exactly when your meat is done.
The reading on this thermometer only takes around three seconds, so you’re not going to be waiting around for your results. It’s waterproof and durable. This is a tool you’ll be using time and time again.
It’s versatile too. Thermometers are often required for beverage and candy making, among other things. This tool is perfect for them all and will give you readings to a very high level of accuracy.
It will automatically turn on/off when you take out the prong and there is also a temperature guide written on it. It’s very easy to use and the magnet and handle hole also makes it simple to store.
2. Alpha Grillers Heavy Duty BBQ Grilling Tools Set
You can’t become a grilling master without having a high-quality set of grilling tools. While you can buy them all separately, it makes sense to get a set such as this. It’s brilliant and comes with a spatula, fork, basting brush, and tongs.
All of them are made out of thick steel so you don’t need to worry about them succumbing to the heat. They’re also fitted with silicone grips which keep your skin safe and the tools firmly in your hand.
Their design also makes them very simple to use, including the lockable tongs that allow them to stay compact when not in use. Added to this, all four of the tools have hooks for easy storage.
One downside of grilling tools is needing to clean them after use. With this set, that won’t be an issue. Not only are they easy to wipe down, but they are also dishwasher safe. This is perfect for anyone needing a brilliant set of essential grilling tools.
3. GEEKHOM Grilling Gloves
Your hands are going to be near very hot pieces of metal and you also have the risk of fat spitting onto your skin. For those reasons, it makes sense to invest in a pair of high-quality grilling gloves.
These are made of silicone which can cope with very high heat of up to 446F. On the inside is soft cotton, making the gloves very easy to wear. The material is breathable, so you won’t need to worry about your hands sweating.
The safety of these gloves doesn’t stop at the high-temperature resistance. They also cover your wrists and have a non-slip surface, allowing you to securely grip whatever you’re holding.
Usability is also exceptional as the gloves are non-toxic and machine washable. Five colors are also available, so you can pick ones that suit your style. If you want to grill in safety and comfort, these gloves are a must.
4. Kona 360 Clean Grill Brush
You’ve cooked all your food, everyone’s loved it, and you’ve had a fantastic day. You then look down at your grill and your heart sinks. You know that it’s going to take a long time to clean and you simply can’t be bothered.
If that sounds like you then you need to get the Kona 360 Clean Grill Brush. It will drastically cut down the time you need to clean your grill. It takes minimum effort and you won’t have that dreaded feeling after you’ve finished cooking.
A great aspect of this brush is that it can be used on all grill types. The three-pronged brush allows you to clean three times faster than most other models. It’s also very easy to use with the textured finger grip and 18” handle.
Impressively, the durability is also very high here. You get a limited five year warranty which is no surprise due to its solid construction. It’s going to last for a long time and you’ll enjoy that super-quick clean time and time again.
5. Primal Grilling Premium Cedar Planks For Grilling
For those that want a unique way of cooking their food, using cedar planks is a brilliant way to do it. All you need to do is soak them in water and then grill away. It results in food that is full of moisture and flavor.
These planks are quite thick which means they don’t burn easily at all. You can use them repeatedly before they become too charred to use. They come in a pack of five, which is going to last a very long time.
The natural cedar doesn’t contain any chemicals and is a very natural way of cooking food. It’s particularly good for fish but the planks will also enhance the moisture and taste of any meat, along with any veggies you want to cook.
When you’re finished using your planks, you can pop them in the drawstring bag provided and use them again whenever you want. You’ll love the results and if you’ve never done it before, you should definitely give it a try.
See more about - The 10 Best BBQ Grills For Your Summer Cookout
6. The Seasoned Griller Store Professional Grade Stainless Steel Grill Basket
While we love grilling, there’s no doubt that it can get messy. Veggies can also be very difficult to cook as they are hard to move around with your grilling tools and can easily fall between the gaps.
An ideal solution is to get this grilling basket from The Seasoned Griller. It’s a great way to keep all your cooking contained while heating it perfectly. The holes are big enough to allow the heat in without letting any food out.
It’s made of stainless steel and can be used on almost any grill. It is worth double-checking the dimensions to make sure it’s a good fit for your model. It’s not too big, so it shouldn’t be an issue. While it’s great for vegetables, you can cook anything with this and it makes it exceptionally easy. It saves cleaning your grill and prevents any lost food. It’s a great addition to your BBQ.
7. Victoria Cast Iron Grill Press
When it comes to pressing down your meat, most people will use the back of a spatula. It’s not what it’s designed for and isn’t great for the task. Instead, you should get a cast iron grill press.
It will help to reduce cooking time while also adding excellent flavor to your food. This model is seasoned with flaxseed oil to produce great results. It’s the ideal tool for searing or flattening meat.
It’s also simple to use, thanks to its excellent design. It has a removable cool-touch wood handle along with a textured bottom for a secure hold. It can be used for a wide variety of different meats and is ideal to have while grilling.
8. OXO Good Grips Meat Shredding Claws
Shredded meat can add an extra dimension to your food in both texture and taste. It works brilliantly with pork but you can also get wonderful results with the likes of chicken and beef.
When it comes to shredding meat, most people try to do it with regular forks, which can be extremely difficult. With these meat shredding claws, you’ll find the task to be incredibly easy.
The long handles and interlocking teeth mean that the task will get completed in no time at all. The grips are also comfortable and have a high level of heat resistance. If you want delicious shredded meat, then there’s no better tool than this.
9. Ofargo Plastic Marinade Injector
Adding flavor to your meat can be difficult. One method is to pierce holes into it with a fork or knife and try to rub marinade or seasoning in. The problem with this is that it’s not very efficient and produces mediocre results. With a marinade injector, you can put that flavor directly into the meat. The difference in results is huge.
You’ll find the meat to be much tastier and the flavor to be much more consistent throughout the meat. This injector is perfect for the job. It’s lightweight and compact so you can just place it on your shelf next to the grill, ready to go. It can easily be used one-handed and is food-safe too.
There are two different needles, one for sauce and another for liquid. It’s a great addition to your grill and takes the flavor to another level.
10. Hudson Durable Goods - Professional Grade Chef Apron
Unless you want clothes that are full of grease, food splashes, and charcoal stains, it’s a good idea to get an apron. This one comes in six different colors and they all look stylish. They’re made from heavyweight cotton that is very tough while still being comfortable to wear. Once you’ve finished using it, then you can throw it in the washing machine before using it again.
There are some great features here, such as the back straps which will prevent any neck pain. There are also four pockets and a towel look, for easy use. It’s easily adjustable and can be taken off quickly with the back buckle.
The versatile apron can be used for a lot more grilling and can be used time and time again. The quality is excellent throughout and most importantly. It’ll keep you and your clothes protected.
See more about - The 8 Best Aprons For Men Who Love To Cook
Grilling Tools FAQs
At a very basic level, you definitely need a spatula, fork, and tongs. After that, it depends on what you’re cooking and how you want it to be cooked. For safety, an apron and gloves are essential whereas other tools such as cedar planks are a great luxury extra.
Grilling tools need to cope with a high level of heat and need to keep you protected from that heat. They should also be comfortable and allow you to grill with ease. Once they tick those boxes, it’s all about how they make your life easier or improve the taste of your food.
This is difficult to answer as there is a vast range of brands that make a wide array of high-quality grilling tools. We think it’s more important to focus on the quality of the product if the tool meets your needs and the customer reviews. All the tools we looked at here get our seal of approval.
As an Amazon Associate we earn from qualifying purchases.
The Difference Between Bourbon and Whiskey
The difference between bourbon and whiskey is as clear as mud when you’re trying to choose between brands and bottles. Bourbon needs to be American-made, aged in oak for four years, and have at least a 51% mash bill, while other American Whiskeys are made using wheat and/or rye or utilize other variations in the distillation process.
Whiskey was a term first employed during the late 1800s to differentiate Irish Whiskey and American liquor from Scotch whisky and Canadian whisky (which everyone called rye). The in-vogue Japanese whisky also went with the Scotch spelling (click here for the full breakdown of whisky versus whiskey).
The following article defines what mash bill is needed to make bourbon, but also identifies the other major American whiskey styles, bottled-in-bond, Tennessee whiskey, and single malt varieties that are beginning to become more prevalent in the US.
What Makes a Liquor Bourbon?
A frequent refrain that can be heard in Kentucky is: “Not every whiskey is a bourbon, but every bourbon is a whiskey.” To be called bourbon:
The liquor needs to be crafted from at least a 51% corn fermented grain mash bill that has been stored in charred oak barrels for four years. The spirit must have been distilled within the United States.
95% of the bourbon whiskey bottled in the U.S. is distilled in the state of Kentucky.
Is All Bourbon From Kentucky?
Kentucky is considered bourbon country, and your home bar is most likely to be stocked with expressions from the Bluegrass state. The majority of bourbon has been distilled in Kentucky since American whiskey production was drawn from the corn-producing farms of the 1700s.
Despite this, other regions – such as Tennessee, Colorado, California, and even New York – are beginning to craft and/or bottle amazing bourbon expressions. Just like with peat and barley malt for Irish Whiskey and single malt and blended Scotch in the British Isles, your liquor of choice comes from the source material.
Finding the best Kentucky bourbon is like finding the best single malt Scotch – it’s entirely subjective and based on a wide variety of factors including flavor, taste, aroma, price, and accessibility.
See more about - The Top 10 Best Kentucky Bourbon Brands To Try In 2021
Wheated bourbons are those made with a large proportion of the mash bills secondary grain being wheat, in addition to the mandated 51% minimum corn. Wheat as the secondary grain provides subtlety and contrast, adding a creaminess and gradual sweetness to the spirit than that derived from the majority corn, malted barley, or rye recipe.
Wheat is also useful during oak barrel aging, with a tendency to age much better than many traditional bourbons (up to around the 20 year mark).
Best choice: Maker’s 46 Wheated Bourbon
Bottled-in-Bond Bourbon and Whiskey
The Bottled-in-Bond Act of 1897 was a set of legal regulations created by the U.S. Government to standardize and authenticate the quality of American distilled alcoholic beverages, especially bourbon, wheat, and rye whiskey.
Prior to the time the Bottled-in-Bond Act was legislated, the American whiskey market was being decimated by inferior quality, unregulated booze. Bottled-in-bond is a whiskey label that adheres to a set of legal regulations contained in the United States government’s Standards of Identity for Distilled Spirits.
The regulatory jargon breaks down as follows:
- The whiskey must be the product of a single distillation season
- The distilled spirit must be made by one distiller at one distillery
- The distilled spirit must be at least four years old
- It must be stored and aged in government bonded warehouses
- The whiskey must also be at least 100 proof (50% ABV)
- Only water may be added to the mash bill
If you purchase a bourbon whiskey or rye labeled bottled-in-bond the regulations from the Act must be met.
Best choice: New Riff Straight Bourbon Whiskey
American Rye Whiskey
For a spirit to call itself American rye whiskey, the grain mash must be made up of at least 51% actual malted rye cereal grain.
Certified rye whiskey’s initial alcohol content can’t be higher than 160 proof, or roughly 80% alcohol before it’s distilled down and eventually bottled.
Aside from the straight rye whiskey, you’ll find some rye mash bills filled out with brown sugar, corn, or malted barley, or have the wooden barrel finish in wine, rum, or brandy casks to add another flavor dimension.
Best choice: WhistlePig Rye 10 Year
American Single Malt Whiskey
Single malt and blended whiskey expressions made from malted barley are becoming more popular craft spirits in the U.S.
With Scotch whisky at its highest popularity level of all time and the emergence of Japanese whisky as a power player in the billion-dollar market for blended malt whisky, there’s an opportunity for local distillers to make quality single malt. While it lacks the cultural cachet of Scotch, American malt whisky is meticulously crafted and caters well to craft distillation.
Best choice: Westward American Single Malt
There’s a simple, yet important distinction between Kentucky bourbon and Tennessee whiskey which makes a huge impact on the taste and what goes on the label. The crucial difference is that Tennessee whiskey is filtered through sugar maple charcoal as part of the Lincoln County Process, a charcoal filtration method in which fresh whiskey passes through charcoal chips and is then put in oak casks for maturation.
For a whiskey to attain the Tennessee label, it must go through the charcoal mellowing stage, in the state of Tennessee.
Best choice: Uncle Nearest 1856 Premium Whiskey
To be called bourbon, your whiskey needs to be distilled in America for a minimum of four years in oak barrels, with a mash bill of at least 51% corn. If it’s predominantly rye, wheat, or malt grain-based, then by law the spirit can’t be called bourbon.
Figuring out what constitutes whisky or whiskey is a lot simpler than in the past when nobody really knew what was going on. The simplest way to remember is If the country of origin has an “e” in it, then spell it whiskey. See, clear as mud!
See more about - The 10 Best Bourbons Under $50 To Try In 2021
The 10 Best Jordans of All Time
Even if you are not a sneakerhead and don’t know all the nitty-gritty details of every pair of kicks on the market, you’re sure to recognize a pair of Jordans when you see them. Or not. I can spot a pair from a mile away; however, I have a friend that doesn’t know the difference between a pair of Nike Jordans and a pair of Adidas Gazelles, which is upsetting, but I digress…
One of the most classic and iconic sneaker styles ever, Jordans have been around for over 30 years and continue to be a part of rare and exclusive collaborations, making them a collector’s dream, with some pairs going for $12k or more. So get your wallet and credit cards out because you may just max them out as you go through this list.
1. Jordan 1 Retro Chicago (2015)
Undoubtedly the most popular style and colorway of all time as far as Jordan’s go. Last released in 2015, this iconic high-top silhouette has become the staple for street ballers, basketball fans, and sneakerheads alike. Since the airing of The Last Dance, the white/varsity red-black Chicago colorway has skyrocketed in popularity, but for the right price you can still get your hands on a pair.
2. Jordan 3 Retro Black Cement (2018)
To celebrate Mr. Jordan’s 55th birthday in 2018, the Jordan 3 Retro emblazoned sneakers feature the original “Nike Air” branding on the black cement for the first time since 2001. This mid-top kick has a black-based leather upper with cement grey, fire red, and white accents. Finished off by the iconic elephant print detailing, it’s one of the most iconic Jordan’s around.
3. Jordan 6 Retro Black Infrared (2019)
The Air Jordan 6 Retro “Infrared” is a 2019 re-release of the OG colorway. The shoe’s black nubuck upper includes a reflective 3M layer with perforations throughout for breathability. The heel, tongue, and lock sport Infrared accents, with the color also featured on the signature midsole detailing. Visible Air in the heel provides cushioning, while the translucent sections continue down onto the outsole for traction.
4. Jordan 1 Retro High OG Shadow 2.0
This very rare OG colorway has hit shelves only three times in the 30 year history of Jordans, making these a must-own for any AJ1 collector. The shoe features a black and grey leather upper with original “Nike Air” branding on the tongue tag and insoles, along with a white midsole and black outsole. It should be noted that the grey leather panels found on the “Shadow 2.0” are lighter in color than the original grey leather on the first “Shadow.”
5. Air Jordan 1 Retro High OG Shattered Backboard
Released in 2015, the “Shattered Backboard” Air Jordan 1 High is inspired by a 1985 exhibition game in Italy in which Michael Jordan broke the glass backboard after a dunk. Constructed in high-quality tumbled leather in the original high top silhouette, the orange, black, and white colorway is taken from the team uniform MJ wore during the game and modeled after the OG “Black Toe” AJ1 color block. Highly limited upon its initial release, the “Shattered Backboard” Air Jordan 1 disappeared quickly and is now one of the most sought after pairs of not just Jordans, but of sneakers, in general.
See more about - The 10 Best Sneakers Under $100
6. Air Jordan 1 Retro Royal (2017)
An original colorway of Michael Jordan’s first signature shoe, this 2017 re-release receives an upgrade in regards to the quality of materials used and its shape, which is truer to the actual 1985 release. The Varsity Royal blue paneling appears in tumbled leather on the toe box, Swooshes, heel, and ankle.
Black premium leather covers the remainder of the upper to complete the classic color blocking. A clean, white midsole balances out the shoe, maintaining the iconic motif along with the Varsity Royal outsole.
7. Jordan 13 Retro Low Chutney
Putting a spin on the iconic Jordan 13 design, Tinker Hatfield designed the Chutney as a stand out in the Air Jordan family. And stand out they do.
The difference between this chutney design and a traditional 13 lies in the cut. These retros replace the classic high top style with a mid top and feature a tan suede upper.
8. Jordan 1 Retro High Dior
If you happen to have $10k-12k burning a hole in your pocket then here is a place for you to spend it. One of the most highly anticipated launches, The Dior x Air Jordan 1 High sneakers are the first collaboration between the luxury brand and sneaker giant.
Featuring a premium white leather upper with wolf grey overlays and the classic Dior logo on the swoosh, this version of the iconic high-top silhouette is a stand-out. The collar has also been altered, stamped with a special “Air Dior” logo.
9. Air Jordan 1 Retro High Rust Pink
Again, if you happen to have $6+ grand just waiting to be spent, first, what do you do for a living, if I may ask, and second, please buy these shoes. These Jordan 1 Retro High Rust Pink kicks were released in early 2017, adding a coral pink “Rust Pink” hue to the two-tone color blocking previously seen on other classic AJ1 silhouettes.
The black paneling features a premium tumbled leather construction, while the midsole appears in white.
10. Air Jordan 5 Retro SP PS “Off-White - Sail
Every sneakerhead remembers when Nike teamed up with Virgil Abloh for the now iconic “The Ten” collection. Abloh added a second colorway to his Jordan 5 collaboration with the Jordan 5 Retro High “Off-White Sail.” This release pays homage to the first pair of Jordans that Virgil ever owned, the Air Jordan 5.
In signature fashion, Virgil has reimagined this classic silhouette with his own recognizable style. This Jordan 5 consists of a sail textile mesh upper with translucent netted panels and circular window inserts throughout the shoe. 3M reflective tongues, fire red Jordan branding, and an aged translucent outsole completes the design.
See more about - How To Choose A More Ethical And Sustainable Pair Of Sneakers